Have you ever thought that how we can know the capacity of printing machine or how we can select the machine for support one job and what kind of job the machine can’t support?

           Often that both customers and printing factory don’t understand about the limited of artwork, printing process and machine.

            If we know about machine capacity, we can find the right job for support and which ones we should developed.

            Fingerprint is a tool that can help us find the capacity of printing machine. The details are as following:
                1. Background
                2. % of Dot Gain
                3. Overlap
                4. Gray Scale
                5. Gradation
                6. Details of letters and lines
                7. % of Height Rapidly
                8. Others

           Capped plate technology is the best technology that can support the printing process. The output of printing will nearby the original image as imagination. Because of cap resin can set two different hardness in one plate, minimize flute mark on post-print corrugate board, enhance deep reverse and reduce print dot gain.

           Pressure Gauge is a specific technology of P-Flex Liquid Photopolymer Plate Making. Because this technology can fix the thickness which available for all corrugate thickness. So, this technology can be another tool for pressure gauge or roller gauge or mole gauge.

           Pressure Gauge is P-Flex Photopolymer Plate which has difference thickness in one plate.

           The most thickness rate will be equalized with the normal pressure and reduce the thickness for higher and higher pressure which we can find the differentiation when it’s compared with general printing plate.

           This is very important for printing person to prepare the printing process.